For Suzhou paint manufacturers how to adjust the air outlet and atomization effect of processing equipment, Xiaobian will talk about his own opinions, hoping to have some reference for you. What kind of Suzhou paint manufacturers are trustworthy products or services, many people are confused about the large number of Suzhou paint manufacturers.
Mechanized spraying process is inseparable from the use of spraying equipment and also involves the adjustment of equipment. The adjustment mainly includes air volume and paint output. In fact, these two factors are interrelated to achieve a scientific and reasonable state.
The painting processing equipment cannot adjust the amount of gas too small, otherwise it is not easy to atomize the paint, resulting in the spraying of paint droplets and the irregularity of the paint film. The amount of paint produced by the spraying equipment is equivalent to the amount of air. Before spraying, the appropriate air outlet and corresponding oil outlet shall be adjusted to make the paint spraying uniform.
When adjusting the painting processing equipment, on the one hand, you can judge the air flow by hearing the sound of the air flow, on the other hand, you can judge whether the air flow is reasonable by observing the atomization degree of the equipment mouth paint and the size of the fan-shaped area.
In order to make the spraying equipment spray the ideal atomization effect, the viscosity of the coating should be controlled first, and the spraying range should be as large as possible; The flow control knob shall be tightened and rotated for 2.5 turns; The tail compressed air control knob equipment shall be as large as possible.
On this basis, the nozzle of the spraying equipment is kept at a distance of 20cm from the workpiece, and the angle between the nozzle and the workpiece is kept at 90 degrees. The spraying speed of the equipment is set to about 80 cm per second, and the interval between coatings is usually 10-15 minutes.
Of course, the interval should be adjusted according to the facilities used and the local climate. It depends on the actual situation. It should not be too dry or too wet. In this way, spray and atomization effects can be achieved.
If you are interested in our Suzhou paint manufacturer, please feel free to contact us.